Upgrades from other carriers
Warning
These upgrade procedures could turn your phone into a
very expensive brick. By attempting these procedures
you take all the risk on yourself. Don't do this
unless you know what you're doing. If any of these
statements make you frightened or scared, don't do it.
Upgrading to the 2.03 ROM
Credits
This process was worked out by Dan (Luv2Chill from
PDAPhoneHome). It was based on postings on xda-developers.
What this gives you
- Windows Media Player 10 (WMP10)
- Separate icons for data status and phone status
- Outlook SMTP Authentication allows setting different username/password than incoming u/p
- Having the latest and greatest -- months before your carrier releases it
Known Issues and Bugs
1. Bluetooth is downgraded to 3500.
2. Button mapping inside the Windows Media Player only
allows assigning to the directional pad and the keyboard.
This means you can assign up, down, left, right, and the
middle button, as well as the keyboard... but not the
"start menu","messaging","explorer","ok","calendar","contacts",
"recording", or "camera" buttons.
The Process
1. Download This zip file to your computer. It is also
Mirrored here thanks to bfaber,
or from here thanks to hat at
sprintpcsinfo.com..
2. Unzip the files into an empty folder
3. Ensure that ONLY these files are in that folder:
- EnterBL.exe
- GetDeviceData.exe
- MaUpgradeUt_noID.exe
- nk.nbf
- notes.txt
- RUU.conf
- RUU.dll
Notes.txt is my personal notes on my ugprade. It isn't a required
file... and is there for your reference only.
4. BACKUP YOUR POCKET PC use Sprite Backup or Activesync or Xbackup for just contacts/calendar/tasks. Make sure that what you use allows you to restore just those things (or use Permanent Save). Do not restore the registry!!!
5. Place your pocket PC in the cradle and make sure it is connected via activesync
6. Double-click MaUpgradeUt_noid
7. If it reports a country-code problem, let it exit and re-run it
8. Once the upgrade is complete, hard reset your phone (power button down + stylus in reset hole)
Enjoy Windows Media Player 10.
Troubleshooting
This section is here so that when things don't work, you can fix it,
quickly, efficiently, and without looking like a moron for not following
directions.
- The upgrade failed with bad country code:
- Don't soft reset. Don't touch anything. Don't disconnect. Just rerun the MaUpgradeUt_noID program
- My PC program said it failed but everything works.
- I did it all and restored and installed and things aren't working.
- Too bad for you. DON'T RESTORE ANYTHING except for contacts, calendar, tasks.
Redo the hard reset, and don't redo the restore.
- I really think I need to post a new thread or crap on a current thread
because I'm unique and my problem is unique.
- Reflash the original ROM your PPC came with. You should have paid
attention to the warnings at the top of this page.
Upgrade to 2.04.00 ROM
Note: this is a much more difficult process than the 2.03
upgrade because this is not an installer file. Instead it's
a ROM dump from someone else's phone.
To use this you have to
- Dump your own ROM
- Capture the first 416 bytes of your own dump and save them
- Replace the new ROM's first 416 bytes with your original ones
- Dump that new ROM onto your phone
Credits
This process was worked out by various people from the threads
referenced below. It was based on a ROM dump from an xda-developers
reader... and lots of hard work by the posters of those threads.
What this gives you
- Windows Media Player 10 (WMP10)
- Separate icons for data status and phone status
- Outlook SMTP Authentication allows setting different username/password than incoming u/p
- Bluetooth "3600 stack" which is the 3500 stack with the BtCeStack.dll v1.0.0.3601
- Having the latest and greatest -- months before your carrier releases it
Files you need
- Romupdate.exe
- Physdiskwrite.exe
- ntrw.exe
- telusd2s.rar Note: this is an almost 200MB file... will take a while
- bytecopy.zip and if you need it, the mfc71 dll
- DisconnectActivesync.zip
Ehud's instructions
You can read my step by step instructions here.
Instruction Threads from Various Forums
Upgrade to SPRINT EVDO beta test
Note: this is so experimental it's not even funny
Files you need
HA_SPCS_EVDO_136_124_01156_PRL20215_Test.zip
Elkay's fixed 20217 PRL
Upgrade to 5.03.02WWE
Note: this is SO experimental, particularly since the ROM is for
a BlueAngel, not a Harrier that no instructions are included. If you
can't figure it out, it's not baked enough for you yet.
Credits
All xda-developers. Buzz Lightyear, Mamaich, etc.
The latest thread
Method:
- Flash the ROM
- Hard reset (instructions below)
- Look for patches to format the DOC into one partition, and hopefully a camera app
Files
The rar file or Mamaich's edited file`
The freeware unrar command line executable
Hard Reset instructions
Missing files
Mamaich's fix for backlight and other things
Mamaich's comments